Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Current »

Router setup

 Setting up your Mercku router depends on the following:

The Mercku router arrives with an Ethernet cable, RJ45 connector.

In order for the WTFast software to work the Mercku router has to operate in router mode

Options:

  1. If your wall port is regular Ethernet port you can connect the Mercku to it with the RJ45 connector.

  2. Alternatively you can connect the Ethernet cable to one of the LAN exits of your ISP router and connect the other end to the Mercku WAN port - creating two networks in your home

  • Setting your ISP router in Bridge mode - please consult your ISP about this option.
    Some ISPs support this option.

  • No labels