Versions Compared

Old Version 6

changes.mady.by.user amit

Saved on

compared with

New Version Current

changes.mady.by.user amit

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. The Web App is the main User Interface for everyday usage and game acceleration

  2. The Control Page - this page is used for general health checks and troubleshooting (more info here)

Expand
titleFirst step is to authenticate your router

  1. Open the WTFast control page on the router - http://mywifi.mercku.tech/wtfast/

  2. In order for your account to know the router and vice versa - you need to authenticate your router with your account.
    Clicking the Authenticate Router button will send you directly to our Web App and apply the authentication operation.

  3. If you’re not logged in to the app you’ll need to login with your WTFast account before the authentication operation will complete.

  4. After you authenticate your router this screen will offer you to reset your router

  5. Clicking reset router here will delete your account details from the router - please reboot the router after this operation to fully delete this information.

...

Expand
titleDevice detection & device type automatic identification
Info

Recommended -
When you setup your router with WTFast, don’t connect any device to it until you want to start adding your consoles.
Once you do, connect each console separately and make sure it has the right Device Type.

Alternatively - if you already have irrelevant devices in your list please see Offline Status section below

  1. Once the router is authenticated WTFast starts looking for connected devices in your network.

  2. Please allow up to 3 min for this operation to complete every time you connect a new device.

  3. A device is discovered and then move to initialize status. This might be very quick or take a few seconds.

    Image RemovedImage Added

  4. The end state for a device is online status. If your device reached this status it means WTFast is ready to listen to traffic that comes from this device

  5. Device Type - The correct device type is necessary for the proper operation of our software.

    1. WTFast makes an effort to identify the correct device type. But this automatic identification is not guarantied to be correct - its the user responsibility to make sure the Device Type is correct!

    2. To validate your devices are identified correctly - hover over the Device Status to display the device its MAC address

...

Expand
titleOffline devices

  1. Currently device that go Offline (disconnect from your network) are not recognized in real time as Offline.

  2. The device will be recognized as off line offline only if WTFast’s router software is restarted
    WTFast's router control page